The physical interaction layer of space
Matrix™ is a robotic skin that lets space assets touch and interact. They dock, recognise each other, share resources and trade goods and services. Think of it as a robotic PCI cable for space.
One tile: 36 columns, 12 docking sites. A carrier locks between the columns; its site powers it, connects it and can cut it off on its own.
Locked at site 6 · poweredDrag the carrier to take control
Earth from low Earth orbit. Photo: NASA.
Getting to space got cheap. What happens after launch is now the expensive part.
Launch costs have fallen about 20 times since the Shuttle era and SpaceX's fully reusable Starship promises to cut them more than 100 times further. Cheaper access speeds up space innovation and businesses, so more teams fly more hardware, more often.
When access is cheap, what becomes valuable changes:
Staying relevant
Swapping parts easily, on the ground before launch or in orbit after it. From one-off missions to mass-produced constellations, the freedom to change components late keeps hardware useful for longer.
Interacting
Meeting other assets in orbit to trade goods and services: refuelling, upgrades, cargo, repair and orbital transfer. Every asset can be both a customer and a supplier, and the more assets that can touch, the more each one is worth.
Sources: CSIS, launch cost per kg to low Earth orbit, Space Shuttle and Falcon 9; SpaceX, Starship target of about $2 million per launch for 100+ tonnes to low Earth orbit.
Satellites can talk to each other. They still can't hand each other anything.
Many agencies, primes and startups build their own docking interface, and no standard exists yet. That is the bottleneck in-space servicing, logistics and manufacturing hit today, not a problem for later: servicers need clients, and clients need servicers, so waiting for a standard stalls everyone. Matrix™ doesn't wait. It adapts to the interfaces that exist.
Keep your interface
Your hardware rides on a carrier, the Mover. Its underside is standard (lock, contacts, identity); its top is matched to your hardware and converts your native power rails and data link to the site. Flight-proven hardware stays as it is.
Any asset, either side
Spacecraft, servicers, tugs, stations, depots and rovers can each carry a Matrix™ skin and a carrier. Goods move as modules on carriers (hardware, tank modules, cargo); services start from the same lock.
One skin, every exchange: pick a use case
A servicer delivers a new module. It docks on a free site and powers up.
Scenes with a visiting vehicle (servicer, tanker, tug, cargo or return vehicle) also need that vehicle to berth or be captured. MagnetMode demonstrates berthing and capture first on GroupSat-α in 2029.
Two configurations
Start with a two-tile face that docks and moves hardware, and scale up tile by tile. Add the arm when the mission needs to reach, capture or repair.
Matrix™ Tile
A breadboard for space hardware: a 96.96 mm tile with 12 docking sites. Each module rides on its own carrier, which the tile can move to another site.
- Lock, power, data and isolation at every site
- A fault stays at its own site
- Starts as a two-tile face and scales up: tiles join edge to edge into faces as large as your spacecraft allows
Built for multi-module spacecraft, hosting platforms and station decks.
Table 1. Configuration 1, key parameters
- Parameter
- Value
- Tile
- 96.96 × 96.96 mm
- Scale
- From two tiles up; add tiles as needed
- Docking sites
- 12 per tile
- At every site
- Lock, power, data and isolation
- Relocation
- Carriers move between sites
Matrix™ Tile + Arm
A robotic PCI cable for space: everything in the Tile, plus a 5-DOF robotic arm on a carrier that travels across the face and reaches beyond its edge.
- Works autonomously: grasps, berths and hands over on its own
- One arm serves every site
- Hands modules on and off the face
- Captures and berths visiting vehicles
Built for servicers, tugs, stations, depots and in-space factories.
Table 2. Configuration 2, key parameters
- Parameter
- Value
- Base
- Everything in Matrix™ Tile
- Arm
- 5-DOF, on a carrier, serves every site
- Reach
- Beyond the face edge
- Autonomy
- Grasps, berths and hands over on its own
- Berthing
- Captures visiting vehicles, first shown on GroupSat-α (2029)
Every touch runs the same five steps: move, lock, recognise, route, meter.
What's inside the Matrix™ Tile
Five layers in one tile, from the carrier your hardware rides on to the plate that holds it all.
Hover over or tap a layer to see what it does.
Late changes without the rework
Hardware increasingly changes faster than a spacecraft's design, build, test and launch cycle. Every late swap means harness rework, re-integration and slip: engineering paid again and again. Not swapping costs too: you fly hardware that was already out of date on launch day. With Matrix™, a late swap is a carrier change: the harness and the rest of the spacecraft stay untouched.
Your flight-proven hardware stays as it is, a fault stays at its own site, and you can start with a two-tile face and add tiles as the mission grows. Your bus does not change.
Pay for what flows through it
The tile is priced close to cost. After that, you pay for what you use: each integration, swap or service that runs through it. You pay as your hardware works, so what you spend grows with the value Matrix™ creates for you.
From the bench to orbit
MVP-II, being built: a 6U-format demonstrator with a two-tile Matrix™ (columns at 1.5× scale for printed parts), a carrier, a 5-DOF robotic arm on a linear slide and a 1U module that berths on its side.
Laboratory and breadboard tests: lock under vibration, contacts, routing, and relocation on a gravity-offloaded rig.
A 1U pathfinder hosted on another spacecraft: Matrix™, carrier and test modules in orbit.
GroupSat-α: two MagnetMode 6U CubeSats berth, ground-supervised first and then autonomously, and exchange hardware.
Common questions
How do two assets get close enough to dock?
The visiting vehicle's own navigation brings it close, as today. Matrix™ takes over at contact; with the arm, the visitor only has to hold station within reach.
Do I have to redesign my hardware?
In most cases, no. A carrier adapts your existing interface, so your flight-proven hardware stays as it is and only the top of the carrier is matched to it. If your hardware has unusual mounting, power or data needs, we work out the fit with you early.
What if one docking standard does win?
It becomes one more carrier.
Does a late swap skip re-testing?
No. A swap after the system vibration test is a configuration change, and the launch provider decides on any retest. What Matrix™ saves is harness rework and re-integration.
What happens while a module moves?
Its carrier unlocks to a glide state, stays captive under the column heads and is unpowered until it locks again. The other modules keep running.
Has it flown?
Not yet. The laboratory tile is designed down to board level and goes into test from December 2026. A pathfinder flies in 2028 and GroupSat-α in 2029.
Antennas made satellites talk. Matrix™ lets them touch.
Building a spacecraft, station, servicer, tug, depot or rover? Tell us what has to meet what.
contact@mgma.space